The USB Programmer is the configuration interface for the user to program the configuration to CMOSTEK RF products with the RFPDK. It connects the module containing RF products via EM-Connector and connects the PC via USB cable. 3 LEDs are available to indicate the working status of the USB programmer.
.jpg)
Definition of EM-Connector
| PIN Number | Signal name | PIN Number | Signal name |
|---|---|---|---|
| 1 | TE | 2 | GND |
| 3 | SCL2_O | 4 | VDD_3.3V |
| 5 | CLK | 6 | RSTB2_O |
| 7 | DATA | 8 | SAD2 |
| 9 | RSTB1_O | 10 | BURN |
Definition of LEDs
| Name | Descriptions | Color |
|---|---|---|
| Run |
Will flash when there is data communication (not burning),
Will be on when buring the CMT2110A-EM
|
Green |
| Err | Will be on for 5 seconds when the burning is failed | Red |
| USB | Will be on when the USB is correctly connected to the PC | Green |
Please contact sales@cmostek.com for detail informations.